Metrel A1532 XA EVSE Adapter

The A 1532 EVSE XA adapter is used for verification of electrical safety and functional testing of EVSE together with supported METREL installation testers. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. XA version supports 3 phase load testing up to 13 A and different error types, including PE open.

If used together with Metrel AutoSequences®, prebuilt in the newer multifunctional testers, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.

Key features

Banana socket outputs for connection to a 3-phase installation tester
Voltage indicators on EVSE output
Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection
Control Pilot resistance selector for simulation of electric vehicle status
Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE)
Type 2 Male Plug connector for connection to EVSE
6 mA EV RCD support
Functional tests support*
EVSE AUTO SEQUENCE® support*
MESM report creation**
Load testing up to 13 A on socket – 1 phase or on banana sockets – 3 phase
Fault simulation of Diode short, PE-CP short and PE open
Output BNC connector for CP signal monitoring

* Functional tests and AUTO SEQUENCE® are supported only on the MI 3155 Eurotest XD, MI 3152 EurotestXC and MI 3152 H EurotestXC 2.5 kV testers.
** Report printing is only available via the MESM PC SW. The MESM license (P 1101) is to be purchased separately.

Application